Fitting Guide

Your Vinyl order is supplied to you with three layers...

• The top layer is the Application Tape.
•  The middle layer is the Vinyl Lettering or Graphic.
•  The bottom layer is the Backing Paper.

We will describe application of your vinyl using one of two methods below.

• Dry application
  This method is usually quicker - but you will need to take a bit more care with the application - as it doesn't tend to leave you any room for error.
• Wet application
  This is usually easier for the inexperienced - in that you have a "little more" chance to reposition the Vinyl.
  Please read completely before you start!

*Please Note*
Vinyl  should not be applied in a cold or windy environment.
Temperature:- Vinyl is much easier to work with when the temperature is at room temperature.
Windy:- It will be very difficult to work with the Vinyl if it is being blown around - also there is much more chance of the "sticky side" picking up some airborne dust - and ruining the finished job.